LaserPecker LP2 vs LP2 Plus: prices and differences
- Data from official spec sheets
- Prices with currency and date
- No paid placements
LP2 has the lower entry price of these two machines. LP2 Plus changes to a 10 W diode, adds Wi-Fi and supports LightBurn while keeping the 100 × 100 mm base area. Choose by material and workflow, then compare roller and extraction bundles separately.
On this page (4)
Entry price and compared bundle
Reference prices for available LaserPecker US bundles, in US dollars (USD). . The compared bundle is identified. Confirm US shipping, sales taxes and the final store price.
| Machine | Price and compared bundle | Source and base area | When to consider it | View offer |
|---|---|---|---|---|
| LaserPecker LP2 | $599LP2 Standard Bundle | 5 W100 × 100 mm, without roller | Small engravings with an entry 5 W bundleA roller changes the bundle price. No IR or fiber source is included. | View bundleLP2 Standard Bundle at LaserPecker US |
| LaserPecker LP2 Plus | $859LP2 Plus Basic Bundle | 10 W100 × 100 mm, without extensions | A 10 W diode for more non-metal projectsKeeps the LP2 base area. Rotary, slide and extraction equipment depend on the bundle. | View bundleLP2 Plus Basic Bundle at LaserPecker US |
No machines match this combination. Increase the budget or change the source.
Areas refer to the base machine without extensions; working shapes matter. Use case guidance is editorial analysis of official specifications. We have not physically tested these machines. Official manufacturer links, no commission.
Moving from LP2 Standard Bundle to LP2 Plus Basic Bundle adds +$260 at the table’s reference prices. This compares two entry bundles; it does not mean they include identical accessories.
What changes and what they share
| Published specification | LP2 | LP2 Plus |
|---|---|---|
| Source | 5 W, 450 nm diode | 10 W, 450 nm diode |
| Base area | 100 × 100 mm | 100 × 100 mm |
| Connection | Bluetooth and USB | Wi-Fi and USB |
| Listed software | LaserPecker Design Space | LaserPecker Design Space and LightBurn |
| Declared maximum speed | 600 mm/s | 4,000 mm/s |
These maximum speeds are manufacturer specifications. They do not equal completed job time: design, resolution, passes, material and settings all matter. Higher power also does not turn LP2 Plus into a fiber or IR machine.
When to choose each one
Consider LP2 to reduce the entry cost when your designs fit the base area. It can suit an initial small engraving workflow; check material compatibility and the required finish first.
Consider LP2 Plus if you need a 10 W diode or plan to use LightBurn and Wi-Fi. For larger surfaces, check the appropriate extension: the working area without accessories remains the same.
The roller changes the comparison
Moving from LP2 Standard to SpinTrack adds +$100. Moving from LP2 Plus Basic to SpinTrack adds +$140. These are checked catalog differences; equipment varies by machine.
For a first project involving tumblers or cylindrical objects, open LP2 bundle prices and LP2 Plus bundles. Confirm supported dimensions and each bundle’s contents.
Sources: official LP2 specifications and official LP2 Plus specifications. See the overall comparison for other sources and budgets.
Based on official specifications and manuals. We have not physically tested the models in this catalog. How we review.
